Skip to content

LuxCraft Outdoor Furniture

LuxCraft is a family-run manufacturer based in Ohio Amish Country, where craftsmen hand-assemble each piece using high-density polyethylene poly lumber made from over 90% post-industrial recycled waste. The material starts as discarded milk jugs and detergent containers, which are...

LuxCraft is a family-run manufacturer based in Ohio Amish Country, where craftsmen hand-assemble each piece using high-density polyethylene poly lumber made from over 90% post-industrial recycled waste. The material starts as discarded milk jugs and detergent containers, which are cleaned, compounded into solid board stock, and pressed into the thick, wood-grain boards that give LuxCraft furniture its characteristic weight and substance. Every joint is fastened with 316-grade stainless steel hardware the same grade used in marine applications so corrosion is never a concern, whether the furniture lives on a lakeside dock, a saltwater deck, or a suburban patio.

The collection spans a wide range from single Adirondack chairs and solo gliders through two- and three-seat porch gliders, porch swings, lounge chairs, dining sets, and picnic tables. Finishes run from neutral standards like White, Black, Chestnut Brown, and Weatherwood through two-tone combinations such as Dove Gray on Slate and Cedar on Black, and into premium options including Antique Mahogany, Birch on White, and Coastal Gray. UV-stabilized pigments are embedded throughout the full depth of the material rather than applied as a surface coating, which is why the color holds after years of direct sun exposure. The furniture requires no staining, waterproofing, or winter storage an occasional wash with soap and water is the only upkeep it needs.

 LuxCraft backs every piece with a lifetime limited residential warranty and a five-year limited commercial warranty.

Why Choose LuxCraft Furniture from Archic?

  • Archic partners directly with LuxCraft, so you receive manufacturer pricing without retailer markups.

  • Most LuxCraft orders ship free, supported by Archic's network of 25 US distribution centres.

  • LuxCraft poly lumber is thicker than most competing brands, built specifically for high-traffic use and extreme weather conditions.

  • Archic's team is available seven days a week for one-on-one support before, during, and after your order.

You Might Also Like

  • LuxCraft Adirondack Chairs: If you're focused on single-seat Adirondack seating specifically, this collection brings together every LuxCraft Adirondack chair style and size in one place.

  • LuxCraft Gliders: The dedicated glider collection covers every two-person and three-person glider style LuxCraft makes, from classic rollback to Adirondack and swivel configurations.

  • LuxCraft Swings: Porch swings in 4-foot and 5-foot sizes, with matching swing stands for freestanding installation anywhere in the yard.

  • LuxCraft Dining Tables: Round, square, and oval outdoor dining tables in the same poly lumber construction, ready to pair with any LuxCraft dining chair from this collection.


Best For

Best for Shared Relaxation on a Porch or Deck

The LuxCraft 5' Plain Poly Rollback Outdoor Glider Chair seats three adults at 67″W with a flip-down center console, 316-grade stainless steel hardware, and 125 lbs of staying power in wind. Standard finishes start from $1,360; premium finishes from $1,496.

Best for the Classic Solo Adirondack Experience

The LuxCraft Outdoor Deluxe Poly Adirondack Chair is LuxCraft's flagship single-seat Adirondack — 52 lbs of HDPE poly lumber with 316-grade stainless steel hardware and a wide contoured backrest built for extended time outdoors. Use the quote form for pricing.

Best for Balcony and Counter-Height Dining

The LuxCraft Adirondack Outdoor Poly Balcony Chair brings Adirondack style to counter-height tables — unusual and practical for compact decks or balconies. Built from recycled HDPE poly resin with a built-in footrest included. Use the quote form for pricing.

Best for Porch Swinging with Three People

The LuxCraft 5' Poly Adirondack Porch Swing With Flip Down Center Console seats three with the console raised, two with it down as a surface. Built from HDPE poly lumber, 96 lbs, available in standard and premium finishes. Use the quote form for pricing.

Best for Lounging and Sun Bathing

The LuxCraft Outdoor Poly Chaise Lounge Chair is the only reclining piece in the range — adjustable from fully flat to seated, with rear wheels for easy repositioning. Built from HDPE poly lumber, 79 lbs. Use the quote form for pricing.

Read more

FAQs

LuxCraft poly lumber is made from HDPE — high-density polyethylene derived from post-industrial waste like milk jugs and detergent containers. The material is cleaned to over 99% purity and pressed into solid board stock containing over 90% recycled content by weight, then assembled with 316-grade stainless steel hardware throughout..

HDPE poly lumber does not rot, split, crack, or absorb moisture. UV-stabilized colour pigments run through the full depth of the material, not just the surface, so the finish does not bleach or peel. LuxCraft backs residential pieces with a lifetime limited warranty.

The collection covers single-seat Adirondack chairs, balcony-height chairs, rockers, swivel chairs, chaise lounges, two- and three-person gliders, 5-foot porch swings, and dining sets at three heights. Tables range from small end tables to oval dining tables seating six. Free colour samples are available before ordering.

The Adirondack Balcony Chair is designed for compact spaces counter-height compatible with a built-in footrest. The 2-foot Adirondack Glider delivers glider comfort in a single-seat footprint. Either pairs well with a LuxCraft Deluxe End Table for a complete setup without taking up much room.

Yes. HDPE poly lumber does not absorb moisture, and the 316-grade stainless steel hardware resists corrosion in saltwater and high-humidity conditions. UV-stabilized pigments prevent fading under intense sun. LuxCraft furniture is widely used in beachside, lakefront, and poolside settings.

Most LuxCraft orders leave the warehouse within three to five business days. Archic partners directly with LuxCraft for manufacturer-level pricing. Free colour samples are available before you commit, and the team is available seven days a week for one-on-one support

See What Our Customers Are Buying!

Blaze Grill
LuxCraft Glider Chair
NovaSolo Chairs
NovaSolo Bookcase
NovaSolo Buffet
Blaze Grill
Night and Day Cube 2
Night and Day Cube 3
Night and Day Clover Bed
GTR Sectional Sofa
Night and Day Clover 2
Night and Day Cube 8