The BLUETTI 2*EP500 + 6*PV200 + 1*Split Phase Fusion Box | Solar Generator Kit is a movable, off-grid energy storage solution that incorporates 5100 watt-hours of Lithium Iron Phosphate Battery and 2000 watts of Pure Sine Wave Inverter with 6000+ charge cycles. This kit offers flexible UPS Mode and In-grid UPS Mode for 24/7 operation, as well as multiple device loading and flexible recharging options. Plus, EP500 can be remotely controlled via the app and features a Smart Touchscreen.
This BLUETTI Solar Generator Kit provides reliable power with the capability to power large appliances such as air conditioners, water heaters, and machine tools. Its Split Phase Bonding Function helps lower power loads in the US and other regions, while the 5100Wh LiFePO4 battery and 2000W rated AC inverter give you maximum power. Get the power to run your entire home or commercial operation hassle-free.
Features
-
Split Phase Bonding Function: For lower power loads in the United States or other regions, BLUETTI is releasing its own "BLUETTI Split Phase Box" to meet the demand for the off-grid power supply for high voltage and high-power equipment. Integrating two EP500 with BLUETTI, you will get higher power, double capacity, and output. High power output means you can now run your home air conditioner, clothes dryer, Tankless Water Heater, Ambient Heater, machine, and other high-power appliances.
-
All-in-one Backup Power Station: The BLUETTI EP500 is shipped with a ground-breaking 5100Wh LiFePO4 battery pack and a 2000W rated (3000W for the EP500 Pro) pure sine wave AC inverter. This class-leading power station brings you the power to run your entire party, family camping trip, cabin workshops, or even your whole house for a day or two in the event of an unexpected outage. Up to 15 outlet sources allow you to power anything from laptops and air conditioners to your electric vehicles without breaking a sweat.
-
Safe, Smart, And Continuously Evolving: The advanced Battery Management System and LiFePO4 chemistry bring the EP500 incredible safety and durability. With the built-in dual-core microcomputer and Internet connection, the EP500’s firmware can be upgraded through your Internet connection. There is no best, only better!
-
Seamless UPS Backup: The EP500 will automatically become your home energy source for essential loads when the electrical grid goes down. Unlike gasoline generators, the BLUETTI EP500 keeps your lights on and laptops charged without upkeep, fuel, carbon monoxide, or annoying noise. Pair with up to 1200W MPPT solar input to rapidly recharge or to keep your appliances running without depleting the onboard battery. Remember when you had to worry about a power outage? Worry no longer, Meet BLUETTI EP500.
-
How to use the EP500: Designed as a flexible power station to meet various scenarios, the EP500 Series has different usages.
Specifications
- 5100Wh LiFePo4/2000W PSW Inverter,6000+Charge Cycle
- Movable Power Station
- In-grid UPS Mode&Flexible UPS Mode(24/7)
- Off-grid Energy Storage
- Multiple Devices Can Be Loaded Simultaneously
- Flexible Recharging Way To Keep Your EP500 Always On
- App Remote Control
- Smart Touchscreen
| Specification |
Details |
| AC Rated Power |
2000W |
|
2000W < load < 2500W, 2min |
|
2500W < load < 3000W, 10s |
|
3000W < load < 4800W, 500ms (peak 4800W) |
| Net Weight |
≈76kg (167lbs) |
| Dimensions |
500300760mm (22.811.829.9in) |
| Battery Capacity |
5100Wh |
| Battery Cell Type |
LiFePO4 |
| Rated Life Cycle |
6000+ |
| Charge Temperature |
0°C ~ 40°C (32°F ~104°F) |
| Storage Ambient Temperature |
0°C ~ 45°C (32°F ~113°F) |
| Working Environment Humidity |
10-90% |
| Certification |
PSE, FCC, CE, UN38.3, MSDS, UL, SAA, and ROHS |
| Warranty Period |
36 Months |
| Color |
Superior Grey, Elegant White |
| INPUT SPECS |
|
| AC Input |
600W Max, 100-264VAC |
| PV Input or T500 Input |
1200W Max, 55-145VDC, 20A |
| OUTPUT SPECS |
|
| USB-C |
1 x 100W |
| AC |
220-240VAC x 3 |
|
100-120VAC x 4 |
| USB-A |
2 x Quick Charging, 36W Total |
|
2 x 5VDC, 3A Total |
| Cigarette Lighter |
1 x 12VDC, 10A |
| RV (Aviation Port) |
1 x 12VDC, 30A |
| DC 5521 |
2 x 12VDC, 10A Total |
| Wireless Charging Pad |
2 x 5/7.5/10/15W |
Downloads
Owner's Manual
FAQs
Q1: In-Grid UPS Setup Guide
A1:
- For non-solar-powered household circuits:
An electrician with a professional technician certificate is required to install the in-grid power system, connect the wires of critical equipment from your main electrical box to the BLUETTI UPS BOX. When the power fails, it will automatically switch to EP500 or EP500 Pro for the power supply. The connection method: power grid -- home main circuit -- BLUETTI UPS box -- EP500 or EP500 Pro -- critical equipment (such as refrigerator, electric light, and server).
- Solar-powered UPS:
1. If the open-circuit voltage of the solar panels is within the specified input range of EP500, they can be directly connected into EP500 or EP500 Pro through the MC4 port connectors to build up the UPS system.
2. If the open-circuit voltage of your panels exceeds the input limitation of EP500 or EP500 Pro, they need to pass the "PV step-down module" to decrease the voltage before connecting into the system. The connection method is solar panels -- PV step-down module -- EP500 or EP500 Pro -- critical equipment (such as refrigerator, electric light, and server).
Q2: Why is there a limitation on the power of the equipment loaded by the US version of EP500 or EP500Pro in the mobile UPS mode?
A2:
When EP500 or EP500Pro is plugged into a home wall outlet, the power output will be limited by the current of the wall plug.
The power of output is subject to:
- If your home's socket features 120V/15A, the equipment carried by EP500 or EP500Pro cannot exceed 1800W.
- If your home socket features 120V/25A, then EP500 load equipment can be no more than 2000W, and EP500Pro can be 3000W for safety.
Q3: Can I change the working mode of EP500 or EP500Pro to work as a mobile UPS after the EP500 connected to the home grid?
A3:
Yes, you can. Turn off EP500 or EP500Pro first, and then unplug the cable on it, remind to set the Max. Grid Current to 15A.
Q4: What is the UPS switching time?
A4:
There are two types of working conditions of UPS for EP500:
- No delay for online UPS.
- 20ms from standby UPS.
Q5: How much is the loss of AC and DC?
A5:
- In standby state: less than 10W.
- AC_ON & DC_OFF: less than 20W.
- AC_ON & DC_ON: less than 25W.
Q6: After the stated 6000 battery cycles, how much capacity is left in EP500 and EP500 Pro?
A6:
EP500 and EP500 Pro can maintain above 50% capacity after 6000 cycles.
Q7: What's the frequency?
A7:
60Hz: US, Canada
50Hz: Europe, UK, Australia
Frequency 50/60Hz cannot be switched.
Q8: What should I do if the solar panels on the roof of my house exceed the open circuit voltage requirement?
A8:
You can reduce the open-circuit voltage by ordering a BLUETTI PV Voltage Drop Modular. It doesn't require changing the original installation and connection method of solar panels in your house. Through this modular, the open-circuit voltage of roof panels can be matched with the input specs of EP500/EP500Pro.
Q9: Can I use third-party solar panels and what conditions need to be met?
A9:
Yes, you can. However, it must meet:
- Open Circuit Voltage (OCV):
EP500: 55-145V/Max.20A, Max.1200W.
EP500Pro: dual MPPT, each is 35-150V/Max.12A,1200W Max. (2400W Max. For dual connection).
- Suitable MC4 connector.
- We recommend that the solar panels to be connected should be of the same brand.
Q10: Are there any restrictions on the use of the 100W USB-C port?
A10:
The charging power will work at only 60W at most instead of 30W if the USB-C cable does not have 5A MFI certification.
Q11: After the DC port of 12V30A is opened, can the other DC ports be used?
A11:
No, for the 30A large-current, the other ports besides 12V/30A RV ports won't work. In addition, you must cover the rubber plug when the DC is turned on and the 12V/30A port is idle, otherwise, it may cause a short circuit if the cable falls in.
Q12: Note on the output power of the Split Phase Bonding Function.
A12:
- There is only one AC port marked 4000W/220-240 (or 6000W/220-240) on the Split Phase Fusion Boxes that can power the High-voltage devices. Other 6 AC ports cannot load more than 2000W on EP500 (3000W on EP500Pro).
- Under Split Phase Bonding mode, the total load power of all AC ports (on the machine and Split Phase Fusion Boxes) cannot exceed 4000W for EP500 (6000W for EP500Pro).
Q13: If one of the EP500 (or EP500Pro) is out of power, does the Split Phase Bonding Function continue to work?
A13:
If any one of the two EP500 (or EP500Pro) runs out of power, the high-voltage output ports on the Split Phase Fusion Boxes will stop outputting power. The machine which still has the power needs to be set to "Single Phase" mode manually.
Q14: Does the Split Phase Bonding Function apply to one EP500 and one EP500 Pro?
A14:
No. Only applicable to units of the same model and specifications. For example, two EP500 or two EP500Pro are recommended. Besides, the Split Phase Fusion Boxes also are different.
