Description
The BLUETTI EP500Pro Solar Power Station is the perfect solution for your family camping trips and home backup power. Boasting a 5,100Wh LiFePO4 battery and a 3,000W rated pure sine wave AC inverter, it offers enough power to run up to 15 outlets - from air conditioners to electric vehicles - for a full day or longer. Its advanced Battery Management System and LiFePO4 chemistry ensure safety and durability, while it's dual-core microcomputer and Internet connection make it continually evolving.
The BLUETTI EP500Pro Solar Power Station provides over 5,100Wh of LiFePO4 energy storage with a 3000W pure sine wave output. It features off-grid energy storage with a movable power station and 24/7 flexible UPS mode with a built-in grid UPS mode. You can run multiple devices simultaneously with its flexible recharging way, and enjoy its smart touchscreen and app remote control convenience.
Features
- All-in-one Backup Power Station: The BLUETTI EP500PRO is shipped with a ground-breaking 5100Wh LiFePO4 battery pack and a 3000W rated pure sine wave AC inverter. This class-leading power station brings you the power to run your entire party, family camping trip, cabin workshops, or even your whole house for a day or two in the event of an unexpected outage. Up to 15 outlet sources allow you to power anything from laptops and air conditioners to your electric vehicles without breaking a sweat.
- Safe, Smart, And Continuously Evolving: The advanced Battery Management System and LiFePO4 chemistry bring the EP500PRO incredible safety and durability. With the built-in dual-core microcomputer and Internet connection, the EP500PRO’s firmware can be upgraded through your Internet connection. There is no best, only better!
- Seamless UPS Backup: The EP500PRO will automatically become your home energy source for essential loads when the electrical grid goes down. Unlike gasoline generators, BLUETTI EP500PRO keeps your lights on and laptops charged without upkeep, fuel, carbon monoxide, or annoying noise. Pair with up to 1200W MPPT solar input to rapidly recharge or to keep your appliances running without depleting the onboard battery. Remember when you had to worry about a power outage? Worry no longer, Meet BLUETTI EP500PRO.
-
How to use the EP500/EP500PRO: Designed as a flexible power station to meet various scenarios, the EP500 Series has different usages.
Specifications
- 5100Wh LiFePO4, 3500+ Cycles to 80% Capacity
- EP500Pro: 3000W Pure Sine Wave Output
- Movable Power Station
- In-grid UPS Mode&Flexible UPS Mode(24/7)
- Off-grid Energy Storage
- Multiple Devices Can Be Loaded Simultaneously
- Flexible Recharging Way To Keep Your EP500 Always On
- App Remote Control
- Smart Touchscreen
| Specification |
Information |
| General Information |
|
| AC Rated Power |
3000W |
| Load Range |
3000W < load < 3750W, 2 minutes |
|
3750W < load < 4500W, 5 seconds |
|
4500W < load < 6000W, 500 milliseconds |
|
(peak 6000W) |
| Net Weight |
≈83kg (182lbs) |
| Dimensions |
500300760mm (22.811.829.9in) |
| Battery Capacity |
5100Wh |
| Battery Cell Type |
LiFePO4 |
| Rated Life Cycle |
3500+ Cycles to 80% Capacity |
| Charge Temperature |
0°C ~ 40°C (32°F ~ 104°F) |
| Storage Ambient Temperature |
0°C ~ 45°C (32°F ~ 113°F) |
| Working Environment Humidity |
10-90% |
| Certification |
PSE, FCC, CE, UN38.3, MSDS, UL, SAA, ROHS |
| Warranty Period |
60 Months |
| Color |
Elegant White |
| Input Specs |
|
| AC Input |
3000W Max |
| PV Input or T500 Input |
2400W Max |
|
12-150VDC, 12Ax2 |
|
12V/24V, 8.2A |
| Output Specs |
|
| USB-C |
2*100W |
| AC |
100-120VAC*5 |
| USB-A |
2Quick Charging, 36W Total, 25VDC, 3A Total |
| Cigarette Lighter |
1*12VDC, 10A |
| RV (Aviation Port) |
1*12VDC, 30A |
| DC 5521 |
2*12VDC, 10A Total |
| Wireless Charging Pad |
2*5/7.5/10/15W |
Downloads
Owner's Manual
FAQs
Q1: Can it connect to the BLUETTI B230/B300 expansion batteries?
A1:
Yes, you can connect the EP500Pro with the BLUETTI B230/B300 expansion batteries using the DC input cable and P090D to MC4 cable. Please note that these cables are sold separately.
Q2: Does EP500Pro support App control?
A2:
Yes, the EP500Pro supports App control. Once connected via WiFi or Bluetooth, you can use the BLUETTI App to control the EP500Pro remotely. This includes functions such as switching the working mode and upgrading the firmware.
Q3: Can I use EP500Pro as a UPS?
A3:
Yes, the EP500Pro can be used as a UPS (Uninterruptible Power Supply). It supports four UPS modes:
- Standard UPS
- Time Control UPS (Pay less for higher electricity consumption)
- PV Priority UPS (Recommended for regions with sufficient solar energy)
- Customized UPS
Q4: How do I connect this to my home main panel?
A4:
BLUETTI recommends that a competent and trained licensed electrician undertake the task of connecting the EP500Pro to your home main panel. The general process involves:
- Connecting the wires of critical equipment from your house electric panel to the BLUETTI Smart Home Panel (sold separately).
- Connecting the EP500Pro to the Smart Home Panel.
Q5: What is the UPS switching time?
A5:
The UPS switching time depends on the working conditions:
- No delay for online UPS.
- 20ms from standby UPS.
Q6: What is the maximum input charging power of the BLUETTI EP500Pro?
A6:
The BLUETTI EP500Pro has a maximum input charging power of 4,000W.
Q7: How can it reach 3,000W AC recharging?
A7:
To achieve 3,000W AC recharging, you can plug the EP500Pro into a 30A wall socket using the 30A AC charging cable (sold separately).
Q8: What kind of solar panels should I choose for EP500Pro?
A8:
The PV input requirements for the EP500Pro are as follows:
- Open Circuit Voltage (OCV): 12-150V
- Input Power: 2,400W Max.
- Include MC4 connectors
BLUETTI highly recommends the following solar panel combinations:
- 6x BLUETTI PV120: Approximately 8 hours*
- 5x BLUETTI PV200: Approximately 6 hours*
- 3x BLUETTI PV350: Approximately 5.5 hours*
*These durations are for reference only.
Q9: Can I use my solar roof to charge the EP500Pro?
A9:
Yes, you can use your solar roof to charge the EP500Pro, provided that:
- The solar roof has NO micro-inverter.
- The solar roof has an open-circuit voltage (OCV) of 12-150V.
- The solar roof has MC4 connectors.
If the OCV of your solar roof falls in the range of 150-550V, you can use the BLUETTI D300S (sold separately) to step down the voltage and enable solar charging.
Q10: Can I connect two EP500Pro for more power (240V Split Phase Bonding)?
A10:
Yes, you can connect two EP500Pro units together for more power using the Fusion Box (P030A). This setup allows for a 240V/6,000W output.
Q11: Can EP500Pro connect with EP500?
A11:
No, the EP500Pro cannot be connected with the EP500. The EP500Pro can only be connected to another EP500Pro for compatibility.
Q12: Can it charge and discharge at the same time?
A12:
Yes, the EP500Pro can charge and discharge at the same time.
Q13: How do I know whether my appliance can work well with the EP500Pro?
A13:
To determine if your appliance is compatible with the EP500Pro, calculate the total wattage of your devices. The EP500Pro should work fine if the total load doesn't exceed its rated 3,000W.
Q14: How long can it run on my device?
A14:
The running time of your device with the EP500Pro can be calculated using the following formula:
Running time = Battery capacity × DoD × η ÷ Device rated power
Here, DoD refers to Depth of Discharge (90% for EP500Pro) and η is the local inverter efficiency (also assumed to be 90% for EP500Pro). The formula gives an estimate, but please note that it's not suitable for inductive loads with compressors like refrigerators and air conditioners. The provided data is for reference only.
Q15: Is the EP500Pro power station waterproof?
A15:
No, the EP500Pro power station is not waterproof. It's important not to expose it to water or store it in a humid environment for a prolonged period.
Q16: When I keep the power plugged in, will EP500Pro stop charging automatically when fully charged?
A16:
Yes, when the EP500Pro is plugged in, it will stop charging automatically when the battery is fully charged. It will resume charging if the state of charge (SOC) falls below 100% without causing any damage to the battery.
Q17: Is it possible to replace the built-in battery?
A17:
No, it is not possible to replace the built-in battery of the EP500Pro. If the internal battery pack is faulty or dead, please contact BLUETTI Customer Service for further assistance.
Q18: How is it different from the EP500?
A18:
The main differences between the EP500Pro and the EP500 are as follows:
- Output power: The EP500Pro provides 3,000W AC power, while the EP500 offers 2,000W AC power.
- Solar Input: The EP500Pro supports up to 2,400W of solar input, whereas the EP500 supports up to 1,200W.
- AC Input: The EP500Pro accepts up to 3,000W AC input, while the EP500 supports up to 600W.
- Output Port: The EP500Pro features an additional 100W USB-C port and 1 NEMA L14-30 port compared to the EP500.
- Recharging: The EP500Pro supports charging from a car cigarette lighter and lead-acid battery, which the EP500 does not support.
Q19: How is it different from the AC300?
A19:
The main differences between the EP500Pro and the AC300 are as follows:
- Battery: The AC300 does not have a built-in battery and must work with the BLUETTI B300 expansion battery. In contrast, the EP500Pro connects with the B300 only for capacity expansion.
- 30A AC Output: The EP500Pro has an NEMA L14-30 port, while the AC300 features a TT-30 port.
- Maximum Input: The AC300 supports a maximum input of 5,400W with two B300 units or 3,000W with one B300. On the other hand, the EP500Pro has a maximum input of 4,000W.
- Weight and Dimensions: The AC300 is smaller in size compared to the EP500Pro.
